All photos: Andrew Allcock
SUPPLY SIDE MILLS CNC OPEN HOUSE
Cobot-loaded lathe
Demonstrating automated machine tending was a combined
set-up of Lynx 2100LSYB and M1013 cobot (10 kg payload,
1.3 m reach)
To allow a Doosan machine to deliver this capability, it just needs the
New large capacity VMC
The new DNM 6700XL is a 2.1 m X-axis machining centre, kitted
out at the Open House event with Nikken rotary table set-up to
allow for the production of this demonstration part
New TT turning machine
This TT2100SYYB is one of
two new double-turret, mainplus
main-
This is a 10” chuck unit with
81/67 mm diameter bar
capacity (main/sub) and
has maximum diameter
and turning length of 230
mm in each case. The
main spindle is a 25 kW, 3,500 rpm, 244 Nm
unit; the sub-spindle a 25 kW, 5,000 rpm set-up. Upper turret is a
12/24-position unit with 5,000 rpm/7.5 kW driven tool stations.
The lower turret is a 12/24-position system. Rapid traverse is
40 m/min in Z and 30 m/min in X
A Puma SX2600S demonstrated power gear skiving of a part
of module 2.5 internal/2 external, employing Seco tooling.
Subcontractor Callatech of Worthing has taken such a solution.
electronic gearbox option – retrofi ttable and considerably lower in
sub-spindle machines.
Cobot display
cost than other solutions, says Mills CNC
There are four models: M0609,
a 6 kg payload, 900 mm reach
model; M1509, 15 kg payload,
900 mm reach; M1013, 10 kg
payload, 1.3 m reach; M0617,
6 kg capacity, 1.7 m reach
(claimed the longest in the
market). Robust industrial
design and easy programming
(up and running in 20 minutes)
are highlighted. Simple (Task
List, inset), more sophisticated
(Task Builder), more detailed
(Task Writer) and manual teach
modes support programming
DVF with AWC
The new 5-axis
DVF 5000 with
automatic work
changer (AWC)
was another
system that
underlined the
automation message
at Mills CNC’s October
event. The machine has
a 500 mm diameter
table capable of holding
400 kg, an 18,000 rpm
spindle and X, Y and Z
travels of 625, 450 and
400 mm, respectively
Gear skiving
www.machinery.co.uk @MachineryTweets November 2019 27
www.machinery.co.uk @MachineryTweets March 2019 25
/www.machinery.co.uk