EXHIBITION SHOW ISSUE EMO 2019 HANOVER, 16-21 SEPTEMBER – WWW.EMO-HANNOVER.DE
Diamond 400 with Robot Loader – a single
machine that can both erode PCD tools and
grind carbide tooling, even in the same
set-up (a tool’s carbide body and its
brazed-on PCD tip), tackling tools from 3 to
380 mm diameter and 520 mm long. The
Robot Loader can accommodate 21 tools of
up to 315 mm diameter and weighing
25 kgs (or 28 tools of up to 220 mm
diameter; 70 tools up to 105 mm diameter)
● Helicheck Plus tool measurement
machine with Robot Loader. The Robot
Loader brings effective automation to the
unmanned measurement of complex
tooling. Up to 2,000 tools with a maximum
weight of 1.5 kg and a maximum length of
280 mm can be automatically loaded
● Ewag Laser Line Ultra – for the state-ofthe
art, ultra-short-pulse laser machining of
all cutting materials,
including CBN,
ceramic, PCD and
CVD, accommodating inserts up to 200 mm
diameter and up to 250 mm long. The
machine features an integrated 6-axis robot
● Ewag Profile Line – for the production of
complex insert geometries, including
interchangeable cutting inserts and
rotationally symmetrical drilling and milling
inserts of HSS, carbide, cermet and
ceramic. This also has an integrated 6-axis
robot for autonomous operation.
#3D_printing #automation #milling
#turning WFL Millturn Technologies
(Kyal Machine Tools, https://is.gd/ebeced)
Hall 26 Stand C16 ● M30-G millturn, 1,800
centre distance, fitted with 120 kg capacity
Kuka QR Quantec automation that features
two grippers, one each for shaft- and chucktype
components, plus workpiece storage
or shaft or chuck-type parts ● A M50-G
millturn with 3,000 centre distance will
demonstrate a new milling strategy having
constant cutting forces for less tool wear,
combined with high pressure coolant for
high alloy steels and superalloy machining
● M80X with 3,000 mm centre distance
and fitted with equipment to support both
laser cladding and laser hardening. The
laser head can be exchanged automatically.
#machining_centres #turning XYZ
Machine Tools (https://is.gd/kufaha)
Hall 27 Stand A10 ● Latest versions of
XYZ’s ProtoTRAK mills and ProTURN lathes,
the RMX 3500 and RLX 425, will be shown.
These feature the latest generation of
ProtoTRAK control, the RX (Machinery
article: https://is.gd/rowije) ● ProtoTRAKcontrolled
XZ 2-OP is a portable vertical
machining centre that can be relocated
anywhere in the factory. With axis travels of
355 by 305 by 455 mm (X, Y, Z), table size
of 457 by 381 mm, an eight-station
toolchanger and 3 hp, 6,000 rpm BT 30
spindle, the XYZ 2-OP increases productivity
at a relatively low annual cost and
The new ProtoTRAK control
will be the big news from
XYZ Machine Tools
40 September 2019 www.machinery.co.uk @MachineryTweets
/WWW.EMO-HANNOVER.DE
/ebeced)
/kufaha)
/rowije)
/www.machinery.co.uk