www.craigstrong.com
Bayton Road, Exhall, Coventry CV7 9EL
Tel: +44 (0)24 7636 1264 Fax: +44 (0)24 7664 4399
sales@craigstrong.com
MACHINING CENTRES
SCOOP PURCHASE OF MACHINES AVAILABLE NOW
2008 DECKEL MAHO DMU 50.
Ex medical research company. Low hours.
Superb condition. Hand tilting and rotating 5-axis
table that reads off on the control. Heidenhain
TNC 530 control. Ideal toolmakers machine
Doosan DNM400 (2012) Trav = 762 X 435 X 510MM
2005 DMG 70 eVolution. Full 5-axis, Heidenhain
530 control, spindle speed 0-18,000rpm, 32 ATC,
travels X=750mm, Y=600mm, Z=520mm
DOOSAN NM510 (2007) Trav=1020 X 540 X 510MM
2015 FEELER VMP32A-APC. Spindle taper 40,
rapid feedrates XYZ: 40/40/30m/min, spindle centre
to column surface 560mm, spindle motor
power 7.5/11kW, spindle nose to table surface
148-653mm, spindle speed 10,000rpm, table size
700 x 500mm, 24 ATC, through-spindle coolant,
(2-off) 2011 HAAS VF-6. TRT 210 B-axis unit,
Haas control, max height from table to spindle centre
line 102-864mm, max workpeice weight 1,814kg,
rapid feedrates XYZ: 25.4 x 25.4 x 18m/minute,
spindle 20hp, 7,500rpm, table 1,626 x 711mm,
24 ATC, BT40, traverses XYZ: 1,626 x 813 x 762mm,
coolant, low-volt light, programmable coolant nozzle,
manuals, 4th axis interface, 5th axis interface
2013 LITZ LU620. Full 5-axis, B-axis tilting
range -50/+110º, Heidenhain TNC-530 control,
max workpeice weight 300kg, rapid feedrates
36m/min, spindle 18/21kW, 12,000rpm, table dia
650mm, traverses XYZ: 620 / 520 / 460mm,
Bridgeport VMC600 (2007) 8000rpm 20 ATC.Heidenhain
2011 MIKRON UCP 600 Vario 5-Axis. B-axis
-115/+30º, C-axis 0.001º (360º full rotation), Heidenhain
TNC-530I control, max workpeice weight 400kg, number
of axes controlled 5 (simultaneous), spindle 30kW, table
280 x 280mm, 30 ATC, HSK A63, traverses XYZ: 600 x
450 x 450mm, coolant, interlocked guards, low-volt
DOOSAN 3100LY (2011) Y axis & Milling, Hydraulic power steady.
light, remote hand wheel, swarf conveyor
DOOSAN 2600Y (2011) 376mm cutting dia. 76mm Bar Cap. Y Axis with milling.
CNC LATHES
swarf conveyor, twin pallet
DOOSAN Puma 5100LYB (installed new in 2017).
Large capacity lathe with Y axis and fully programmable
SMW SLUX5.1, steady rest range 85-352mm dia with
automatic clamp, max turning length 2,020mm, Y-axis
travel 150mm (+/-75mm), 21in chuck, bar capacity
165.5mm, spindle 1,500rpm, 45kW with 2-speed
CMZ TC30 (2009) 550mm x 1350mm max turned.gearbox, 10”high pressure Chuck.70 Fanuc bar coolant 32i system.Control.
DOOSAN 5 AXIS Machining Centre (2017)
Very low hours
2008 MAZAK Integrex 800V/5 II E Tower. B-axis
movement head: +120/-30°, Mazak Matrix control,
max machining dia 730mm, maximum workpeice
weight 680kg, rapid feedrates 50m/min, spindle
speed 12,000rpm (milling), 80 ATC, traverses
XYZ: 1,100/800/900mm, through-spindle coolant,
tool setter, swarf conveyor, twin-pallet, full 5-axis
machine, the table spins just like a lathe to
machine large components in one setup
2010 MIKRON HPM 800U. Spindle taper HSK63,
max workpiece size 800kg, number of axes
controlled 5/5 simultaneous, spindle speed
20,000rpm, table size 500 x 631mm, 165 ATC,
traverses XYZ: 800 x 800 x 550mm, machine
weight 15,500kg, through-spindle coolant,
swarf conveyor, touch probe
2006 XYZ 710 Mini Mill
2008 CMZ TL25B. 250mm chuck,
Fanuc control, 77mm bar cap, 400mm
max turned, 40kW 3,500rpm spindle,
676mm between centres
2007
BRIDGEPORT
HARDINGE
XR1000
Nikken 5-axis
rotary table,
Heidenhain
TNC 530 control
2012
HAAS TM2P
Ex film company.
Really nice
condition
With tooling
2015 XYZ ProtoTrak LPM VMC with ProtoTrak
control. Table size 900 x 500mm, traverses
XYZ: 785/470/530mm, min/max height under
spindle 85-610mm, spindle 11kW, 8,000rpm,
16 ATC, BT40, coolant, interlocked guards,
low-volt light, USB port, swarf auger
2007 CINCINNATI CFV5-i 5-axis. A-axis
+30~120º, C axis 0.001º (360º full rotation),
Fanuc 18IMB control, number of axes controlled
5 (4 simultaneous), spindle 18.5kW, 10,000rpm,
table 350mm, 30 ATC, traverses XYZ: 600 x
540 x 540mm, coolant, interlocked guards,
manuals, 5 axis, swarf auger
2007
MORI SEIKI
Dura Turn 2550
2005
HAAS TL1
Ex film company.
Really nice
condition With
toolholders
through-spindle coolant
2008 MORI SEIKI NZ1500T2Y. Twin 16-station
turrets (Y-axis milling on top turret) with twin
6,000rpm spindles fitted with C-axis and brakes,
22kW, 52mm bar cap, 70 bar high-pressure
coolant on both turrets, Fanuc 31i control with
Mapps III conversational control
WANTED URGENTLY — BRIDGEPORT VMCs, JAPANESE VMCs, HURCO VMCs, SLIDING HEAD CNCs — Trade enquiries welcome
/www.craigstrong.com
link