www.craigstrong.com
Bayton Road, Exhall, Coventry CV7 9EL
Tel: +44 (0)24 7636 1264 Fax: +44 (0)24 7664 4399
sales@craigstrong.com
MACHINING CENTRES
2008 DECKEL MAHO
DMU 50. Ex medical
research company. Low
hours. Superb condition.
Hand tilting and rotating
5-axis table that reads off
on the control. Heidenhain
TNC 530 control. Ideal
toolmakers machine
2005 DMG 70
eVolution. Full 5-axis,
Heidenhain 530
control, spindle
speed 0-18,000rpm,
32 ATC, travels
X=750mm,
Y=600mm,
Z=520mm
2017 HURCO DCX22i. Table size 2,100 x
1,600mm, spindle taper BT50, max workpeice
weight 8,000kg, rapid feedrates 32/32/24m/min,
spindle motor power 26kW, spindle nose to table
surface 152mm / 902mm, spindle speed 6,000rpm,
table size 2,100 x 1,600mm, 40 ATC, traverses
XYZ: 2,200 x 1,700 x 750mm, machine dimensions
L x D x H: 6,591 x 6,031mm, weight 20,510kg
2015 FEELER VMP32A-APC. Spindle taper 40,
rapid feedrates XYZ: 40/40/30m/min, spindle centre
to column surface 560mm, spindle motor
power 7.5/11kW, spindle nose to table surface
148-653mm, spindle speed 10,000rpm, table size
700 x 500mm, 24 ATC, through-spindle coolant,
(2-off) 2011 HAAS VF-6. TRT 210 B-axis unit,
Haas control, max height from table to spindle centre
line 102-864mm, max workpeice weight 1,814kg,
rapid feedrates XYZ: 25.4 x 25.4 x 18m/minute,
spindle 20hp, 7,500rpm, table 1,626 x 711mm,
24 ATC, BT40, traverses XYZ: 1,626 x 813 x 762mm,
coolant, low-volt light, programmable coolant nozzle,
manuals, 4th axis interface, 5th axis interface
2013 LITZ LU620. Full 5-axis, B-axis tilting
range -50/+110º, Heidenhain TNC-530 control,
max workpeice weight 300kg, rapid feedrates
36m/min, spindle 18/21kW, 12,000rpm, table dia
650mm, traverses XYZ: 620 / 520 / 460mm,
2011 MIKRON UCP 600 Vario 5-Axis. B-axis
-115/+30º, C-axis 0.001º (360º full rotation), Heidenhain
TNC-530I control, max workpeice weight 400kg, number
of axes controlled 5 (simultaneous), spindle 30kW, table
280 x 280mm, 30 ATC, HSK A63, traverses XYZ: 600 x
450 x 450mm, coolant, interlocked guards, low-volt
light, remote hand wheel, swarf conveyor
CNC LATHES
swarf conveyor, twin pallet
DOOSAN Puma 5100LYB (installed new in 2017).
Large capacity lathe with Y axis and fully programmable
SMW SLUX5.1, steady rest range 85-352mm dia with
automatic clamp, max turning length 2,020mm, Y-axis
travel 150mm (+/-75mm), 21in chuck, bar capacity
165.5mm, spindle 1,500rpm, 45kW with 2-speed
gearbox, high pressure 70 bar coolant system.
Very low hours
2008 MAZAK Integrex 800V/5 II E Tower. B-axis
movement head: +120/-30°, Mazak Matrix control,
max machining dia 730mm, maximum workpeice
weight 680kg, rapid feedrates 50m/min, spindle
speed 12,000rpm (milling), 80 ATC, traverses
XYZ: 1,100/800/900mm, through-spindle coolant,
tool setter, swarf conveyor, twin-pallet, full 5-axis
machine, the table spins just like a lathe to
machine large components in one setup
2010 MIKRON HPM 800U. Spindle taper HSK63,
max workpiece size 800kg, number of axes
controlled 5/5 simultaneous, spindle speed
20,000rpm, table size 500 x 631mm, 165 ATC,
traverses XYZ: 800 x 800 x 550mm, machine
weight 15,500kg, through-spindle coolant,
swarf conveyor, touch probe
2015 XYZ ProtoTrak LPM VMC with ProtoTrak
control. Table size 900 x 500mm, traverses
XYZ: 785/470/530mm, min/max height under
spindle 85-610mm, spindle 11kW, 8,000rpm,
16 ATC, BT40, coolant, interlocked guards,
low-volt light, USB port, swarf auger
2008 CMZ TL25B. 250mm chuck,
Fanuc control, 77mm bar cap, 400mm
max turned, 40kW 3,500rpm spindle,
676mm between centres
2007
BRIDGEPORT
HARDINGE
XR1000
Nikken 5-axis
rotary table,
Heidenhain
TNC 530 control
2012
HAAS TM2P
Ex film company.
Really nice
condition
With tooling
2006
XYZ 710
Mini Mill
2017 HURCO VMX64i. Spindle
taper BT50, max workpiece weight
2,722kg, rapids: 18/18/13.5m/min,
spindle motor power 22kW, spindle
nose to table surface (min) 152mm,
spindle speed 8,000rpm, table size
1,676 x 889mm, 30 ATC (swing
arm), traverses XYZ: 1,625 x 864 x
762mm, swarf conveyor, machine
dimensions L x D x H: 6,338 x
4,457mm, weight 14,925kg,
2007 CINCINNATI CFV5-i 5-axis. A-axis
+30~120º, C axis 0.001º (360º full rotation),
Fanuc 18IMB control, number of axes controlled
5 (4 simultaneous), spindle 18.5kW, 10,000rpm,
table 350mm, 30 ATC, traverses XYZ: 600 x
540 x 540mm, coolant, interlocked guards,
manuals, 5 axis, swarf auger
2007
MORI SEIKI
Dura Turn 2550
2005
HAAS TL1
Ex film company.
Really nice
condition With
toolholders
through-spindle coolant
2008 MORI SEIKI NZ1500T2Y. Twin 16-station
turrets (Y-axis milling on top turret) with twin
6,000rpm spindles fitted with C-axis and brakes,
22kW, 52mm bar cap, 70 bar high-pressure
coolant on both turrets, Fanuc 31i control with
Mapps III conversational control
WANTED URGENTLY — BRIDGEPORT VMCs, JAPANESE VMCs, HURCO VMCs, SLIDING HEAD CNCs — Trade enquiries welcome
/www.craigstrong.com
link