sales@craigstrong.com
www.craigstrong.com
MACHINING CENTRES
Bayton Road, Exhall, Coventry CV7 9EL
Tel: +44 (0)24 7636 1264 Fax: +44 (0)24 7664 4399
sales@craigstrong.com
MACHINING CENTRES
2015 HAAS VF6SS. Rapid feedrates 35.6m/min,
spindle motor power 22.5kW, spindle speed 12,000rpm,
table size 1,626 x 711mm, 40-station tool changer
2017
DOOSAN
DNM350/
5AX
2015
HURCO
VMX50
CNC LATHES
2010 MORI Seiki NZ1500T2Y
with Twin Turret with Y axis and
Sub Spindle
2011 DMG Gildemeister
Spring 42 High
performance bar machines
arriving soon
MAZAK V655 60 with 4th axis
12/24-station turret, X-axis travel 227.5mm, Y-axis travel +/-41mm, Z-axis travel 320mm, C axis & milling,
tool setter, Y axis, tailstock, 3-jaw chuck, parts catcher
2011 DOOSAN 3100LY. C axis 0.001º, chuck 12in, Fanuc I
Series, max cutting dia 420mm, max cutting length
1,280mm, milling motor power 5.5/7.5kW, milling
5,000rpm, rapids 30m/min, spindle motor power
18.5//22kW, spindle nose A2-11, spindle speed 2,800rpm,
swing 850mm, swing over carriage 670mm, tailstock quill
stroke 100mm, tailstock taper MT #5, tool size 25mm,
tooling config BMT65, 12-station turret, X-axis travel
293mm, Y-axis travel +/-65mm, Z-axis travel 1,350mm
2011 DOOSAN Puma 2600LY. Bar cap 76mm, Iemca KID80 bar
feed, C axis 0.001º, Fanuc I Series, max cutting dia 376mm,
max cutting length 1,280mm, milling motor power 5.5kW,
milling 5,000rpm, rapids XYZ: 30 x 30 x 10m/min, spindle
motor power 22kW, spindle nose A2-8, spindle speed 3,500rpm,
swing 780mm, swing over the cross-slide 630mm, tailstock
quill stroke 100mm, tailstock taper MT#5, tool size 25mm,
12-station turret, X-axis travel 260mm, Y-axis travel
+/-52.5mm, Z-axis travel 1,350mm
2008 DMG 50 EVO Linear, ex Govt. Minimal use.
Superb Condition arriving soon
2012 DMG Gildemeister Twin 42
arriving soon
WANTED URGENTLY — BRIDGEPORT VMCs, JAPANESE VMCs, HURCO VMCs, SLIDING HEAD CNCs — Trade enquiries welcome
2011 DOOSAN 3100LY. C axis 0.001º, chuck 12in, Fanuc I
Series, max cutting dia 420mm, max cutting length
128 Craig Strong 108 - 618.qxp_Layout 1 25/01/2021 11:58 Page 2
1,280mm, milling motor power 5.5/7.5kW, milling
5,000rpm, rapids 30m/min, spindle motor power
18.5//22kW, spindle nose A2-11, spindle speed 2,800rpm,
swing 850mm, swing over carriage 670mm, tailstock quill
stroke 100mm, tailstock taper MT #5, tool size 25mm,
tooling config BMT65, 12-station turret, X-axis travel
293mm, Y-axis travel +/-65mm, Z-axis travel 1,350mm
(2-off) 2011 HAAS VF-6. TRT 210 B-axis unit,
Haas control, max height from table to spindle centre
line 102-864mm, max workpeice weight 1,814kg,
rapid feedrates XYZ: 25.4 x 25.4 x 18m/minute,
spindle 20hp, 7,500rpm, table 1,626 x 711mm,
24 ATC, BT40, traverses XYZ: 1,626 x 813 x 762mm,
coolant, low-volt light, programmable coolant nozzle,
manuals, 4th axis interface, 5th axis interface
2015 XYZ ProtoTrak LPM VMC with ProtoTrak
control. Table size 900 x 500mm, traverses
XYZ: 785/470/530mm, min/max height under
spindle 85-610mm, spindle 11kW, 8,000rpm,
16 ATC, BT40, coolant, interlocked guards,
low-volt light, USB port, swarf auger
2015 NAKAMURA AS200. Bar
capacity 65mm, C axis 0.001º,
chuck size 200mm, Fanuc I
Series control, dist between
centres 427mm, machine
dimensions L x D x H: 2,028 x
1,665 x 1,852mm, machine
weight 3,200kg, max cutting dia
340mm, max cutting length
300mm, milling motor power
5.5/3.7kW, milling 6,000rpm,
rapid feedrates XYZ: 24 x 36 x
6m/min, spindle motor power
15/11kW, spindle nose A2-6,
spindle speed 4,500rpm, swing
400mm, tailstock quill diameter
70mm, tailstock quill stroke
80mm, tailstock taper MT #4,
2011 DOOSAN Puma 2600LY. Bar cap 76mm, Iemca KID80 bar
feed, C axis 0.001º, Fanuc I Series, max cutting dia 376mm,
max cutting length 1,280mm, milling motor power 5.5kW,
milling 5,000rpm, rapids XYZ: 30 x 30 x 10m/min, spindle
motor power 22kW, spindle nose A2-8, spindle speed 3,500rpm,
swing 780mm, swing over the cross-slide 630mm, tailstock
quill stroke 100mm, tailstock taper MT#5, tool size 25mm,
www.craigstrong.2008 12-DMG station 50 turret,EVO X-axis Linear,travel ex 260mm,Govt. Y- Minimal axis travel
use.
+/-52.5mm, Z-axis travel 1,350mm
com
2008 JOHNFORD Promec DMC 1600. Heidenhain TNC530
control, travels X=63in, Y=51in, Z=31.5in, table to spindle
5.9in min - 37.4in max, distance between columns 51.2in,
table working surface 66.9in x 43.3in, maximum workload on
table 13,200 lbs, spindle motor 35hp, spindle taper HSK 63,
2008 DMG 50 EVO Linear, ex Govt. Minimal use.
Superb spindle Condition speed 0-15,000rpm
arriving soon
2006 XYZ 710 Mini Mill
2013 DOOSAN Lynx 220B. Bar capacity 51mm, chuck size
200mm, Fanuc OI-Series control, machine dimensions L x D x H:
2,327 x 1,620 x 1,655mm, machine weight 2,900kg, max cutting
dia 320mm, max cutting length 305mm, rapid feedrates X/Z: 30
x 36m/min, spindle motor power 11kW, spindle nose A2-6, spindle
speed 5,000rpm, swing 510mm, swing over carriage
290mm, tailstock quill diameter 65mm, tailstock quill stroke
80mm, tailstock taper MT #4, tool size 25 x 25mm, 12-station
turret, X-axis travel 175mm, Z-axis travel 330mm, tool setter,
tailstock,2012 interlocked DMG guards,Gildemeister low-volt light, magazine Twin 42
bar feed,
arriving soon
parts catcher, manuals
2012 DOOSAN Puma 2600Y. Bar capacity 76mm, Hydrafeed
MX-1B bar feed, C axis 0.001º, Fanuc I Series, driven tools motor
power 7.5kW, main motor 22kW, max cutting dia 376mm, max
cutting length 760mm, milling 5,000rpm, rapids XYZ: 30 x 30 x
10m/min, spindle motor power 22kW, spindle nose A2-8, spindle
speed 3,500rpm, swing 780mm, swing over the cross-slide
630mm, tailstock taper MT #5, 24-station turret, X-axis travel
260mm, Y-axis travel +/-52.5 mm, Z-axis travel 830mm, C axis &
milling, coolant, Y axis, collets, mag bar feed, collet chuck,
DAHLIH DCM-4225 (2016) 4200 x 2500 x 800mm Traverse XYZ. Table 4000 x 2200mm.
Max workpeice wheight 12 TON.
parts catcher, swarf conveyor
2008 MAZAK Integrex 800V/5 II E Tower. B-axis
movement head: +120/-30°, Mazak Matrix control,
max machining dia 730mm, maximum workpeice
weight 680kg, rapid feedrates 50m/min, spindle
speed 12,000rpm (milling), 80 ATC, traverses
XYZ: 1,100/800/900mm, through-spindle coolant,
tool setter, swarf conveyor, twin-pallet, full 5-axis
machine, the table spins just like a lathe to
machine large components in one setup
2010 MIKRON HPM 800U. Spindle taper HSK63,
max workpiece size 800kg, number of axes
controlled 5/5 simultaneous, spindle speed
20,000rpm, table size 500 x 631mm, 165 ATC,
traverses XYZ: 800 x 800 x 550mm, machine
weight 15,500kg, through-spindle coolant,
swarf conveyor, touch probe
2010 DOOSAN Lynx 300. Bar capacity 76mm, chuck size 12in,
Fanuc OI with iGuide, main motor 15/11kW, max cutting dia
450mm, max cutting length 765mm, rapid feedrates X/Z: 24 x
30m/min, spindle bore 86mm, spindle nose A2-8, spindle speed
3,500rpm, swing 651mm, swing over carriage 461mm, machine
dimensions L x D x H: 3,991 x 1,785 x 1,715mm, machine
weight 4,000kg, tailstock quill diameter 80mm, tailstock quill
stroke 120mm, tailstock taper MT #4, X-axis travel 255mm,
Z-axis travel 790mm, tool setter, tailstock, interlocked guards,
Mori SEIKI MV55 with 4th Axis
low-volt light, 3-jaw chuck, USB port, swarf conveyor
2010 MAZAK VTC-300C II. Mazatrol 640M control,
spindle speed 12,000rpm, 30-position tool changer
Superb Condition arriving soon
WANTED URGENTLY — BRIDGEPORT VMCs, JAPANESE VMCs, HURCO VMCs, SLIDING HEAD CNCs — Trade enquiries welcome
Bayton Road, Exhall, Coventry CV7 9EL
Tel: +44 (0)24 7636 1264 Fax: +44 (0)24 7664 4399
2012 DOOSAN Puma 2600Y. Bar capacity 76mm, Hydrafeed
MX-1B bar feed, C axis 0.001º, Fanuc I Series, driven tools motor
power 7.5kW, main motor 22kW, max cutting dia 376mm, max
cutting length 760mm, milling 5,000rpm, rapids XYZ: 30 x 30 x
10m/min, spindle motor power 22kW, spindle nose A2-8, spindle
speed 3,500rpm, swing 780mm, swing over the cross-slide
630mm, tailstock taper MT #5, 24-station turret, X-axis travel
260mm, Y-axis travel +/-52.5 mm, Z-axis travel 830mm, C axis &
milling, coolant, Y axis, collets, mag bar feed, collet chuck,
parts catcher, swarf conveyor
2010 MAZAK VTC-300C II. Mazatrol 640M control,
spindle speed 12,000rpm, 30-position tool changer
2017
DOOSAN
DNM350/
5AX
2015 XYZ ProtoTrak LPM VMC with ProtoTrak
control. Table size 900 x 500mm, traverses
XYZ: 785/470/530mm, min/max height under
spindle 85-610mm, spindle 11kW, 8,000rpm,
16 ATC, BT40, coolant, interlocked guards,
low-volt light, USB port, swarf auger
2008 JOHNFORD Promec DMC 1600. Heidenhain TNC530
control, travels X=63in, Y=51in, Z=31.5in, table to spindle
5.9in min - 37.4in max, distance between columns 51.2in,
table working surface 66.9in x 43.3in, maximum workload on
table 13,200 lbs, spindle motor 35hp, spindle taper HSK 63,
spindle speed 0-15,000rpm
(2-off) 2011 HAAS VF-6. TRT 210 B-axis unit,
Haas control, max height from table to spindle centre
line 102-864mm, max workpeice weight 1,814kg,
rapid feedrates XYZ: 25.4 x 25.4 x 18m/minute,
spindle 20hp, 7,500rpm, table 1,626 x 711mm,
24 ATC, BT40, traverses XYZ: 1,626 x 813 x 762mm,
coolant, low-volt light, programmable coolant nozzle,
manuals, 4th axis interface, 5th axis interface
2008 MAZAK Integrex 800V/5 II E Tower. B-axis
movement head: +120/-30°, Mazak Matrix control,
max machining dia 730mm, maximum workpeice
weight 680kg, rapid feedrates 50m/min, spindle
speed 12,000rpm (milling), 80 ATC, traverses
XYZ: 1,100/800/900mm, through-spindle coolant,
tool setter, swarf conveyor, twin-pallet, full 5-axis
machine, the table spins just like a lathe to
machine large components in one setup
2010 MIKRON HPM 800U. Spindle taper HSK63,
max workpiece size 800kg, number of axes
controlled 5/5 simultaneous, spindle speed
20,000rpm, table size 500 x 631mm, 165 ATC,
traverses XYZ: 800 x 800 x 550mm, machine
weight 15,500kg, through-spindle coolant,
swarf conveyor, touch probe
2006 XYZ 710 Mini Mill
2015 HAAS VF6SS. Rapid feedrates 35.6m/min,
spindle motor power 22.5kW, spindle speed 12,000rpm,
table size 1,626 x 711mm, 40-station tool changer
2015
HURCO
VMX50
CNC LATHES
2015 NAKAMURA AS200. Bar
capacity 65mm, C axis 0.001º,
chuck size 200mm, Fanuc I
Series control, dist between
centres 427mm, machine
dimensions L x D x H: 2,028 x
1,665 x 1,852mm, machine
weight 3,200kg, max cutting dia
340mm, max cutting length
300mm, milling motor power
5.5/3.7kW, milling 6,000rpm,
rapid feedrates XYZ: 24 x 36 x
6m/min, spindle motor power
15/11kW, spindle nose A2-6,
spindle speed 4,500rpm, swing
400mm, tailstock quill diameter
70mm, tailstock quill stroke
80mm, tailstock taper MT #4,
12/24-station turret, X-axis travel 227.5mm, Y-axis travel +/-41mm, Z-axis travel 320mm, C axis & milling,
tool setter, Y axis, tailstock, 3-jaw chuck, parts catcher
2010 DOOSAN Lynx 300. Bar capacity 76mm, chuck size 12in,
Fanuc OI with iGuide, main motor 15/11kW, max cutting dia
450mm, max cutting length 765mm, rapid feedrates X/Z: 24 x
30m/min, spindle bore 86mm, spindle nose A2-8, spindle speed
3,500rpm, swing 651mm, swing over carriage 461mm, machine
dimensions L x D x H: 3,991 x 1,785 x 1,715mm, machine
weight 4,000kg, tailstock quill diameter 80mm, tailstock quill
stroke 120mm, tailstock taper MT #4, X-axis travel 255mm,
Z-axis travel 790mm, tool setter, tailstock, interlocked guards,
low-volt light, 3-jaw chuck, USB port, swarf conveyor
2013 DOOSAN Lynx 220B. Bar capacity 51mm, chuck size
200mm, Fanuc OI-Series control, machine dimensions L x D x H:
2,327 x 1,620 x 1,655mm, machine weight 2,900kg, max cutting
dia 320mm, max cutting length 305mm, rapid feedrates X/Z: 30
x 36m/min, spindle motor power 11kW, spindle nose A2-6, spindle
speed 5,000rpm, swing 510mm, swing over carriage
290mm, tailstock quill diameter 65mm, tailstock quill stroke
80mm, tailstock taper MT #4, tool size 25 x 25mm, 12-station
turret, X-axis travel 175mm, Z-axis travel 330mm, tool setter,
tailstock, interlocked guards, low-volt light, magazine bar feed,
parts catcher, manuals
2011 DMG Gildemeister
Spring 42 High
performance bar machines
arriving soon
DAHLIH DCM-4225 (2016) 4200 x 2500 x 800mm Traverse XYZ. Table 4000 x 2200mm.
Max workpeice wheight 12 TON.
2008 DMG 50 EVO Linear, ex Govt. Minimal use.
Superb Condition arriving soon
Mori SEIKI MV55 with 4th Axis
MAZAK V655 60 with 4th axis
2010 MORI Seiki NZ1500T2Y
with Twin Turret with Y axis and
Sub Spindle
1027657_07-04-2021_Craig Strong Machine Tools Ltd.indd 1 31/03/2021 15:16:34
/www.craigstrong.com
link